Design2Mould ApS
CVR 45772586 · Private limited company (ApS) · Active · Very high risk
Design2Mould ApS is a Private limited company (ApS), founded on , based in Måløv. The company is registered in the industry andet specialiseret designarbejde. Our model estimates a bankruptcy risk of 10.9% over the next 12 months, which is 7.7 times the average for Danish companies. CEO: Rasmus Holm Devald Arvidsen, Sabrina Devald Arvidsen.
Bankruptcy risk for Design2Mould ApS
7.7 × the average (1.41%) · higher risk than 97% of active Danish companies
Increases the risk
Reduces the risk
The factors show how often companies with the same characteristic went bankrupt compared with the average (“lift”). The risk is a statistical estimate from a model trained on 141,000+ Danish bankruptcies (AUC 0.93) – not a credit rating. Read about the method.
Company details
- CVR number
- 45772586
- Status
- Active
- Company type
- Private limited company (ApS)
- Founded
- (1 years)
- Address
- Måløv Værkstedsby 79
2760 Måløv - Municipality
- Ballerup
- Industry
- Andet specialiseret designarbejde (741400)
Bankruptcies in the industry: Andre liberale, videnskabelige og tekniske tjenesteydelser i.a.n. - Share capital
- DKK 20k
- Audit opted out
- Yes
Warning signs
| Annual reports filed late | 0 of 0 |
| Missing annual report | No |
| Negative equity | – |
| Equity ratio | – |
| Current ratio | – |
| Moves (last 2 years) | 1 |
| CEO changes in total | 0 |
| CEO's previous bankruptcies | 0 |
| Other companies at the address | 6 |
| Going-concern uncertainty | No |
Management, owners and auditor
| Role | Name | From | To |
|---|---|---|---|
| CEO | Rasmus Holm Devald Arvidsen | Current | |
| CEO | Sabrina Devald Arvidsen | Current | |
| Owner (50%) | Rasmus Holm Devald Arvidsen | Current | |
| Owner (50%) | Sabrina Devald Arvidsen | Current | |
| Founder | Rasmus Holm Devald Arvidsen | Current | |
| Founder | Sabrina Devald Arvidsen | Current |
Address history (1 moves)
| Måløv Værkstedsby 79, 2760 Måløv | |
| c/o LegalDesk.dk ApS, Njalsgade 21F, 2., 2300 København S |
Other companies at the same address
- BH KØKKEN ApS Bankrupt
- CGI PLAST & DESIGN ApS Bankrupt
- G.V. HARNISCH DESIGN A/S Bankrupt
- Aria Manufacturing ApS Active
- RD-SUPPORT ApS Active
- REDEV ApS Active
- Smart Devices ApS Active
Similar companies in Ballerup
- Skou Ideas ApS Skovlunde
- Exacta Production ApS Skovlunde
- House of Circle ApS Måløv
- Dansk Kvalitets Håndværk ApS Skovlunde
- Lizard Design IVS Ballerup
- re:place IVS Ballerup
- 3Delt IVS Måløv
- DAN DESIGN & PRODUCTION ApS Ballerup
Questions and answers about Design2Mould ApS
Has Design2Mould ApS gone bankrupt?
No, Design2Mould ApS is not registered as bankrupt in the CVR register. Its status is: active.
What is the bankruptcy risk of Design2Mould ApS?
Our model estimates a bankruptcy risk of 10.9% over the next 12 months (very high risk), which is 7.7 times the average for Danish companies.
Who is the CEO of Design2Mould ApS?
Rasmus Holm Devald Arvidsen, Sabrina Devald Arvidsen are the CEOs of Design2Mould ApS.
When was Design2Mould ApS founded?
Design2Mould ApS was founded on 15 July 2025.
Source: the CVR register and annual reports published by the Danish Business Authority. The information is updated continuously.